Creating and sharing knowledge for telecommunications

High Electrical Anisotropic Multilayered Self‐Assembled Organic Films Based on Graphene Oxide and PEDOT:PSS

Gaal, G. ; Braunger, M. ; Rodrigues, . ; Jr., A. ; Gomes, H.L.

Advanced Electronic Materials Vol. 7, Nº 8, pp. 2100255 - 2100255, June, 2021.

ISSN (print): 2199-160x
ISSN (online): 2199-160X

Scimago Journal Ranking: 1,77 (in 2021)

Digital Object Identifier: 10.1002/aelm.202100255

Multilayered self-assembled structures having different constituents are very appealing for preparing novel materials with unusual electrical phenomena not observed on the individual sheets. Here, the fabrication and characterization of aligned multilayered architectures comprised of reduced graphene oxide (rGO) and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), embedded into polymer electrolytes, are reported. The in-plane conductivity is five orders of magnitude higher than the cross-plane value, resulting in the highest anisotropic ratio reported to date for multilayer materials. Temperature-dependent measurements corroborate the high anisotropic electrical behavior, with charge transport weakly thermally activated (Ea = 33 meV) along the aligned conductive phases. Cross-plane charge transport fits well with the variable ranging hopping model, presenting an activation energy of 1.0 eV. Such a high anisotropic electrical behavior is explored in a novel transistor architecture where the anisotropic film operates simultaneously as a dielectric layer and as a transistor channel, with the cross-plane electric field modulating the in-plane conduction. The device shows ambipolar charge transport; however, the n-type carrier transport dominates the conduction with the field-effect mobility of 4.0 cm2 V–1 s–1. A simple and efficient way is presented to use electrical anisotropy to tailor transistors without a lattice mismatch at the dielectric/semiconductor interface.